When sewage comes up a drain in Sherman Oaks
Sewage is one of the IICRC’s examples of Category 3 water[IICRC 2026 position statement], and the EPA flood cleanup guide recommends professional cleanup when sewage is involved[EPA flood cleanup guide]. The work is containment, removal of porous materials the sewage touched, cleaning and disinfection, then drying.
Stay out of the area if you can. If you have to enter, the CDC advises rubber boots and gloves[CDC]. Stop running water anywhere in the house until the line is cleared.
Step by step
- Stop water use. No flushing, showers or laundry.
- Contain. Plastic barriers keep the area sealed off.
- Remove. Porous materials the sewage touched come out.
- Clean, disinfect, dry. Hard surfaces cleaned and the structure dried.
Do
- Keep children and pets away.
- Photograph the damage[FEMA].
Avoid
- Running fans that push air from the area into the house.
- Cleaning sewage-soaked carpet yourself.
The first hour after you find water
- Stop the water. Close the fixture valve under the sink or toilet, or the main shut-off if you cannot find the source. It helps to find the main shut-off before you ever need it.
- Make it safe. Keep away from outlets, cords and fixtures that water has reached, and turn off power at the breaker only if you can do it from a dry spot[CDC].
- Document it. Take photos and video of each room, the source and damaged belongings before anything is moved[FEMA].
- Move what you can. Lift furniture onto blocks or foil, pull rugs off wet carpet, and get photos, papers and electronics to a dry room.
- Call for restoration. Drying should start within 24 to 48 hours[EPA], and extraction works better before water soaks deeper into the pad and walls.
Leave large amounts of water to extraction equipment, and keep lights and ceiling fans off under any wet ceiling.
Where most household water damage starts
- Supply lines. Braided and plastic supply lines under sinks and toilets fail at the connection. A failed line can run at full pressure until the valve is closed.
- Water heaters. When the tank or fittings leak, water spreads across the floor from the garage, closet or utility room.
- Washers. Old rubber hoses split, and a washer drain that backs up puts dirty water on the floor.
- Air conditioning. Condensate lines clog and drain pans overflow during long cooling seasons.
- Kitchen appliances. Ice maker lines and dishwasher hoses leak out of sight under the cabinets.
- Weather. Winter storms, roof leaks and street flooding. Contaminated wind-driven rain counts as Category 3 water[IICRC 2026 position statement].
The source matters because it sets the water category and the starting point for moisture mapping.
Leaks you cannot see in Sherman Oaks homes
On a concrete slab, water does not drain away. It spreads sideways under baseboards, cabinets and flooring into the next room, which is why the wet area on the meter is often larger than the wet area you can see.
Air conditioning is a frequent source. The EPA advises keeping AC drip pans clean and drain lines flowing[EPA], and notes that pans which do not drain can let water into the system[EPA]. When the air handler sits in the attic, an overflowing pan usually shows up first as a ceiling stain.
Places to check:
- Water heater platforms and the floor around them
- Washer supply hoses and the wall behind them
- Sink cabinets and the floor under them
- Inside walls around pipes that leak or condense[EPA]
- Under flooring next to tubs, showers and toilets
LADWP’s leak tips include a simple toilet test: put food coloring in the tank, and if color shows up in the bowl without flushing, there is a leak that should be fixed[LADWP].
Slab floors and raised floors
Los Angeles City Planning’s history of postwar tract housing notes that these houses often have concrete slab floors rather than raised floors with wood joists[LA City Planning]. Much of the Valley was built in that era, so on many calls the water is on or under a slab.
Raised foundations show up more in older homes. Earthquake Brace + Bolt, the state program for retrofitting raised-foundation houses, uses the percentage of pre-1940 houses in a ZIP code as one of its selection criteria[Earthquake Brace + Bolt]. Water under a raised floor can sit unseen until the floor softens.
Either way, the drying plan changes: slab jobs focus on flooring, baseboards and the bottom of walls, while raised-floor jobs add the subfloor, joists and crawl space.
Drying time and what speeds it up
The EPA’s target is to dry wet materials within 24 to 48 hours[EPA]. A small clean-water leak caught early can often be dried in a few days. After a flood, the EPA warns that drying out can take several weeks[EPA flood cleanup guide].
Dry outdoor air is not the same as a dry wall. EPA guidance is to ventilate when outside air is cold and dry and to dehumidify when it is warm and humid[EPA], and the inside of a wet wall cavity or carpet pad still needs moving air and dehumidification to dry in time.
Leave the equipment running, keep doors to the drying area closed, and let the technician move it. Turning off air movers at night to cut noise can add days to the job.
When the rain comes all at once in Sherman Oaks
Most Valley rain falls in a handful of winter storms. In February 2024, the National Weather Service recorded 4.10 inches at downtown Los Angeles on February 4 and another 2.93 inches on February 5, with 12.66 inches for the month, more than 9 inches above normal[NWS Los Angeles].
Storms like that find every weak spot: roof flashing, skylights, sliding door tracks and low garage slabs. Water that comes through the roof soaks insulation and drywall in the ceiling before it shows as a stain.
Keep people out from under a bulging ceiling and away from wet light fixtures, and photograph the damage before the crew starts[FEMA].
Re-entering a flooded Sherman Oaks home
Turn around at flooded roads. Six inches of fast-moving water can knock an adult down, and 12 inches of rushing water can sweep away most cars, according to the NWS[NWS].
With water in the house, turn off power at the breaker if you can do it safely, and disconnect appliances before power is restored[CDC]. Document the damage with photos before anything is moved[FEMA].
Sewage cleanup and Sherman Oaks homes
The Census Bureau counts 13,045 housing units in ZIP code 91403. 36% are detached single-family houses, 61% are in buildings with two or more units, and 45% of occupied homes are owner-occupied[U.S. Census Bureau]. 67% of homes in ZIP code 91403 were built before 1980 and the median year built is 1971[U.S. Census Bureau]. At that age, original galvanized or copper supply lines, cast-iron drains and older shut-off valves deserve a look.
Sherman Oaks is part of the City of Los Angeles, so water comes from LADWP. Leaks at the street, the meter or a broken main are reported to LADWP at 1-800-DIAL-DWP (1-800-342-5397), where representatives answer outage and water trouble calls around the clock[LADWP].
Other services in Sherman Oaks
- Water damage restoration in Sherman Oaks
- Emergency water removal
- Water extraction
- Water mitigation
- Water damage cleanup
- Flood restoration
- Flood cleanup
- Burst pipe water damage